ours came with what some type of lighting that comes from under the door when you open it. You may be able to add-on to the existing lighting already there.
Black,I purchased a 4 pack of leds that can change to several colors, can stay single color, or flash to beat of music off of ledglow.com. pretty good stuff. all you have to do is find a spot to put the bar of light, either screw it in or tape it, and just hide the wires. took me 20mins to install and it looks great in red.
where did you get those lights and how did you mount them?I ran some 2.5 m slim LED driving lights. I don't think my wife will let me do more, but she has never stop me from doing things before.
where did you get those lights and how did you mount them?
well I am an LED guy as well.
I for one do not like the color red. just my preference I am and blue and white kind of guy. so that being said the cluster has already been removed. Shifter bezel , ac controls and the light that emits from the dash around the whole screen and cluster etc has got to be changed SO i did just that. I just finished the cluster so basically the layour will be.
since I have the TFT screen in the dash all ive got to worry about is the tach, fuel and indicators etc. so anyways. right now if you look at your cluster.
your tach and gas is white the turn signals are green and the other things are yellow or green correct . well For me not any more. no.
my tach is blue, fuel is blue needles are blue and turn signals are blue. all things like check engine light abs seat belt etc are all white. THe only thing i cant change is the screen Untill someone figures out how to hack that.
Man whats up with the flower ? LOL
thats just an example I will gladly post up pictures of the led swaps later on.
Do you have any pics of where you tied into the dimmer? how difficult was it to gain access?Foot well leds are easy you may not like the way I did mine but what I did was go to walmart the sell a strip that has 6 leds each pack has two strips so I bought two packs just stick 1 strip in each footwell and hook your wires to a 12 volt power source I run mine to the dimmer switch for the dash led surround just found the hot wire when the lights are on and pushed the wire into the back of the plug so I didn't have to cut the wires and splice and then put a piece of tape around the wire so it wouldn't pull out. They are abt as bright as the factory footwell lighting if you want them brighter use more leds.here is a pic of them